Download Designing Cisco Data Center Infrastructure (DCID).300-610.PremiumDumps.2025-12-31.209q.vcex

Vendor: Cisco
Exam Code: 300-610
Exam Name: Designing Cisco Data Center Infrastructure (DCID)
Date: Dec 31, 2025
File Size: 7 MB
Downloads: 4
Download Exam

How to open VCEX files?

Files with VCEX extension can be opened by ProfExam Simulator.

Download
ProfExam Simulator

Purchase
Coupon: EXAMFILESCOM

Discount: 20%

ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator
ProfExam Discount

Demo Questions

Question 1
An engineer must use OTV for Layer 2 connectivity between data centers to support virtual machine mobility between the customer sites. To support this requirement, the engineer must ensure the existence of the same default gateway on both sites. Additionally, the operations team reports high bandwidth utilization on site A and wants to optimize the outbound traffic flows to use a local DC exit point.
Which feature must be used to meet these requirements?
  1. data group
  2. FHRP filter
  3. ARP filter
  4. control group
Correct answer: B
Explanation:
A: 1B: 4 - Mosted
A: 1B: 4 - Mosted
Question 2
An engineer is implementing management access to a Cisco Nexus platform. The customer requires a solution that provides isolation between the data and control planes, in addition to management that uses encryption and authentication. The customer will manage the device using both IPv4 and IPv6.
Which two components should be used to meet these requirements? (Choose two.)
  1. mgmt0 interface
  2. SSH protocol
  3. SNMP
  4. SVI interface
  5. Telnet protocol
Correct answer: AB
Explanation:
AB: 3 - Mosted
AB: 3 - Mosted
Question 3
A network engineer is using a Cisco UCS environment connected to a Fibre Channel storage array. The Cisco UCS environment must be connected to an existing SAN network, and several Cisco MDS 9000 Series Switches must be added to increase storage density. The solution must not exhaust the SAN network from the list of available domain IDs after connecting. Also, most of the SAN traffic must be mapped from the Cisco UCS blades to a specific group of the fabric interconnect ports. Which two features must be deployed to meet these requirements? (Choose two.)
  1. dynamic port pinning
  2. end host mode
  3. static PIN grouping
  4. N-Port ID virtualization
  5. priority flow control
Correct answer: E
Explanation:
B: 2 - Mosted
B: 2 - Mosted
Question 4
An engineer must design a VXLAN EVPN network. The solution should optimize broadcast, unknown unicast, and multicast (BUM) and short BUM replication, and use PIM anycast RP.
Which solution should be included in the design?
  1. head-end replication
  2. PIM sparse mode
  3. PIM dense mode
  4. ingress replication
Correct answer: B
Explanation:
B: 4 - Mosted
B: 4 - Mosted
Question 5
An engineer is expanding an existing iSCSI environment and must choose an addressing scheme. When checking one of the devices, the engineer discovers this target device naming used:
{prefix}.2019-01.com.acme123:00.ffd0cb21.bcb392817521
Which addressing scheme was used in the environment?
  1. Network Address Authority
  2. Extended Unique Identifier
  3. iSCSI Qualified Name
  4. Fibre Channel ID
Correct answer: C
Explanation:
C: 4 - Mosted
C: 4 - Mosted
Question 6
Refer to the exhibit.
A cloud service provider deployed three geographically separated Cisco ACI data centers. One of the customers needs to host a clustered application that is spread across the three data centers. The cluster nodes that host the application need a Layer 2 topology to communicate with each other.
Which Cisco ACI topology design meets these requirements?
  1. Multi-Cloud
  2. Multi-Site
  3. Multi-Pod over OSPF EVPN
  4. Multi-Pod over MP-BGP EVPN
Correct answer: D
Explanation:
B: 2
B: 2
Question 7
An engineer must secure the payload traversing across the DCI. The solution must support confidentiality and integrity and it must be open standard. The solution must encrypt Ethernet frames regardless of the upper layer protocol used.
Which technology must be used to support these requirements?
  1. GRE
  2. OTV
  3. MACsec
  4. IPsec
Correct answer: C
Question 8
An engineer must interconnect two geographically separated data centers. The service provider offers a Layer 2 Metro Ethernet link. The strict security policy requires that the information that is shared between two sites must be sent encrypted. The application deployed between two sites requires a line-rate throughput regardless of the packet size and speed.
Which solution meets these requirements?
  1. L2TPv2
  2. IPsec
  3. MACsec
  4. L2TPv3
Correct answer: C
Explanation:
B: 1C: 5 - Mosted
B: 1C: 5 - Mosted
Question 9
An engineer must logically partition two Cisco Nexus 7000 Series Switches into two environments called Test_1 and Production_1. The environments must use only F2-Series line cards and be limited to a maximum of 265 port-channels. Which Cisco Nexus feature must be used?
  1. vPC
  2. VDC
  3. vFC
  4. VRF
Correct answer: D
Explanation:
B: 1 - Mosted
B: 1 - Mosted
Question 10
An engineer is implementing a storage area network where an NPV is used. The engineer notices that the servers in a storage farm are experiencing heavy traffic contention. The engineer needs to migrate traffic from heavily loaded server interfaces to interfaces with less load. When the new links are deployed, the existing traffic is not rebalanced as expected. Which feature must be used to meet these requirements?
  1. NPIV
  2. multiple VSAN support
  3. DPVM
  4. disruptive load balancing
Correct answer: A
Explanation:
D: 1
D: 1
CONNECT US
HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset

HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen

ProfExam
ProfExam at a 20% markdown

You have the opportunity to purchase ProfExam at a 20% reduced price

Get Now!